How to Clean Your AC Units: DIY Project

When spring was come and summer just around the corner, you will miss the summer sun that shines down around you. You can go outside and enjoy your day with the sun. When the day is over, the time is come. You will turn up your AC because there is nobody want to get sweat inside.

Like the other device, AC need service as well. Usually, the repairing and maintenance costs that related with the furnaces and air conditioners are not that cheap. Well, here several step guides to prepare your air conditioner for the next upcoming heat.

Clean AC units are also important for your air circulation inside your home. You should consider the duct cleaning and air vents cleaning. This is free and simple that can help your air conditioner running effectively and able to save up your money. Several equipment that you need to clean up your AC:

There are several items that you will need to do this job. You may already have them inside your home, they are:

– Towel.

– The air filter (size will vary based on your need).

– Hose (to hook up the running water).

– Hex of head nut driver (size is varied).

– I cup of cleaning product.

Several guides for your DIY to clean your AC units:

  • Considering the safety first.

Like the usual, the first thing that you should do when you work on HVAC equipment is ensure tat all of the source powers are off. All of the air conditioners have the disconnect mounted inside your house within the few feet from the condenser. Condenser is the part of air conditioner that had placed outside.

When you open the lid to disconnect it, it should be a handle that able to pull out and in that useful to disconnect the power supply in your air conditioner. Once you remove this handle, you should ensure that the shut the lid on is absolutely disconnected.

You should note that you need to disconnect the power to unit. If you want to get extra safety, you can find out the breaker in your electric panel that had dedicated to the AC systems and just shut it down.

  • Removing the top of your Air Conditioning unit.

To clean AC units, you need ensure that the power is off then use the hex head nut drivers to remove the bolts which had placed around of the top units. After you remove the bolts, the whole of the top will able to lift out from the whole condenser with the fan and motor as well. you cannot remove the bolts that hold the fan and motor on their lid.

There are several wires that had attached with the motor to service panels on every side from your AC unit. You can leave this wire, because you do not need to include with the electrical components inside the service area. You must have enough slack which you can swing the lid in any side that makes the wires do no trap in the sharp things.

You should note that while performing this maintenance, do not smash the fins which had wrapped around your condensing unit. This fin is allowing the air to be pulled off into your condenser.

  • Start to clean your AC.

You can start by removing the debris in or out of you unit by your hand. Now, you can use the towel over the service panel area. This is to prevent the water to enter the panels. Then you can spar you hose inside and outside from the unit. You do not worry about water it will save.

After you have done with spray out the dirt’s, you should see the fins and brushes it. Then you can remount the lid then bolt it down.

  • Change the air filter then clean your drain.

Your air conditioning is very sensitive with the air flow, if the filter had cogged, your fan will work harder and the evaporator coil will get freeze solid. This is can damage your AC, you should clean your drain in every year. This is optional choice and based on your need. You can use the cleaning product that secure for your environment.

Energy Bill Saving Tips for This Winter

Many Game of Thrones lovers may be familiar with one of the leads said on the last season’s finale: “Winter is coming” while it got you excited at the time, most likely it would then remind you of the dreaded reality – the fact that winter was, indeed, coming and so the vision of heating system flashed before your eyes.

Some people just simply hate winter for the icy cold weather, but to others it is more of the fact that winter does not only bring the extremely cold weather but also the rising heating bills. However, there are actually a way around it. Simply because bringing heat into the comfort of your home during the winter season does not necessarily mean you should also burning a hole in your pocket in the aftermath.

True, the use of heating system may blow up your energy bills, but you know what? It does not have to be. We have compiled a few valuable tips to save bill on heating system for you!

  • Make threshold adjustments

Inspecting every inch of your house before the winter season is the first thing every homeowner should do. By inspecting your house you will find out if there are problem areas you must fix because whether you believe it or not, finding out these problems long before the winter hits the town will make it possible for you to fix it and that will significantly shrink your energy bills.

How so? Take your door thresholds for example. If your door does not directly touch the threshold, you will most likely lose the indoor air you have paid with your hard-earned money to heat your room – as a result the air along with the heat will through the opening or gap.

The easiest way to find out whether you need to make an adjustment is by closely looking at the position of your door. Are you able to notice or see the daylight from right under your door? If you can, then you are at risk.

To adjust it, you only have to turn (typically counterclock-wise) the screws that are placed in the thresholds and adjust the height of your door. To eliminate the opening or gap, you only have to adjust it until you cannot see the daylight from under it – although you must remember that you shouldn’t lower it to the point it drags every time you open or close the door. Else you are at risk of ruining its weatherstripping.

  • Portable heater is a lifesaver

Purchasing a space heater is actually one of the way you can reduce bout 3% of your energy bills. Simply turn down the temperature of your furnace when the whole family members gather in the same room, for example a living room, and use the space heater instead.

The rest of your house may be a tad cooler than the room you and your family members are in, but you can easily turn the furnace temperature back up anytime. It may not be significant, but when you do this over and over throughout the winter months, the difference is noticeable.

  • Plastic film is your best friend

With about $6 for the 62” x 84” plastic film, you may prevent the heat from escaping through your windows as well as patio doors. Not only is the plastic film extremely easy to put on and take off once the spring rolls in, it has been proven to be able to help homeowners to knock down about 14% of their heating bills.

  • Avoid your hot water and money go down the drain

Water heating is known to make up as big as 12% portion of your utility bill, which is why those who are looking to cut down their energy bills especially during the winter must take this into account. While modern water heater works wonderfully, not everyone can afford to purchase a new one, you can still do the steps below to save up:

o Insulate a few feet of the pipes that are connected to your heater

o Install timer that allows you to automatically turn the heater off when you’re not using it.

o Install heat trap on the tank of your water heater – you may need a professional to help you with the installment but it’s well worth the fee.

Tips for Getting Your House Ready for Winter

While we’re fortunate to live in an area where winters aren’t harsh, preparing your home for the change in seasons is still important. Start by clearing your yard of any debris and mulching flower beds and around trees and bushes. Inspect walkways for any broken or missing bricks/stones and repair promptly to eliminate trip and fall hazards. Wash windows and siding if needed, and inspect your roof for any damage. This is very important. You don’t want an ice or heavy rainstorm to reveal them! Be proactive.

You should also check your home for drafts and repair any holes or cracks you find. As the temperatures cool, insects and small critters could find their way into your home through them. This is also a good time to check your home for any signs of termite damage. If you have a heating system, now’s the time to clean and test it. While you’re at it, test your generator as well. If it’s not working properly, check out generator repairs Houston TX for help. A generator can be a real life saver during a power outage, and even though we don’t have to worry about brutal snow storms, ice storms and heavy rains can just as easily take down power lines and cause problems. If you have very young, very old, or infirm family members, a generator is even more important. It will allow you to stay warm/cool and well-fed during times of severe weather or other causes of power outages.

If you want to paint the exterior of your home, now is the perfect time. With humidity levels down and cooler temps, it will be more comfortable to do the job and it will dry better. The same is true if you need to stain your home or apply a waterproofing treatment.

If you’re putting up holiday decorations, use care. Inspect all ladders before using and always have someone on the ground watching when you use one. Make sure the lights you use are made for outdoor use and that the cords aren’t damaged in any way. Only use properly grounded outlets and extension cords and never overload them.

Finally, clean those gutters! Clogged gutters are a leading cause of leaky roofs and water damage, so make sure to clear them out regularly. Applying a specially made mesh cover over them can help make the job easier.